FEATURES

Ready-to-use bacteriostat, fungistat and deodorizer based upon chlorine dioxide technology. Recommended for control of bacteria, mold, mildew, fungi and yeast in IAQ applications. Its EPA registration includes application in HVACR ventilating equipment, including coils, condensate pans, filters and duct-work.

BENEFITS

Prevents the growth of bacteria which can significantly aggravate or even initiate an allergic response. Oxidizes odors associated with bacteria, mold, mildew, smoke, animals, etc.

Application

Evaporator coils, condensate drain pans, filters and ductwork in air conditioning systems can be an excellent breeding ground for bacteria and mold. Left untreated, it can grow and eventually affect indoor air quality, a major concern of the IAQ movement today. Use of a product like Bio-Fresh cd in a total program such as Nu-Calgon’s IAQ Assurance Program will correct this problem by inhibiting the growth of bacteria or mold.

Microbial Control

Bacteria and mold are everywhere in our environment. For many allergy sufferers, their presence and growth in the air handling system can significantly aggravate or even initiate an allergic response. Bio-Fresh cd can address this by preventing the growth of bacteria, mold, etc. It specifically reacts with the microbial’s cell wall, interfering with and preventing their growth.

Deodorization

The powerful active ingredient in Bio-Fresh cd oxidizes odors associated with bacteria, mold, mildew, smoke, animals, etc. in the air and in air handling units. The product does not cover up or mask the odor with alcohol or perfumes, it eliminates or “oxidizes” the source of the odor, leaving the air fresh and clean.

Toxicity & Safety

An enhanced benefit of Bio-Fresh cd is its low toxicity and safety rating from the EPA. Bio-Fresh cd does not use any environmentally damaging propellants or flammable ingredients, and may be applied to occupied spaces.

Installed Cost

Over-the-Counter Cost

N/A

FEATURES

Surge protectors are designed to protect your equipment by dissipating momentary voltage spikes and transient power surges.

BENEFITS

Protects your heating and cooling equipment from damaging power surges.

Everyone already knows the benefit of providing surge protection for our home computers and electronics. But most people don't consider the need for surge protection on their HVAC equipment.

Most modern furnaces and heat pumps are heavily reliant upon computer boards and other sensitive electronics.

Power surges or voltage spikes from electrical storms or power company fluctuations can cause damage to these internal electrical components.

Help protect your equipment and avoid expensive service repairs by installing the ICM Surge Protector.

Works on

Installed Cost

Over-the-Counter Cost

FEATURES

The Kidde AC/DC carbon monoxide alarm plugs directly into your home's standard wall outlet making installation quick and easy. The 2-AA battery backup provides protection even during power outages when many CO incidences occur. The Kidde AC/DC carbon monoxide alarm has a 10-year limited warranty.

BENEFITS

The Kidde plug-in carbon monoxide alarm with battery backup provides you and your family with a warning signal to protect against dangerous levels of carbon monoxide in your home. The battery backup feature provides continuous monitoring of CO levels, even during power outages when AC-only units are not providing protection. The detector has a 10-year product life, providing 40% longer protection than other CO alarms.

No home with a fossil-fuel-burning appliance (furnace, water heater, stove, etc.) should be without a carbon monoxide detector.

Carbon monoxide is an odorless, tasteless, poisonous gas that can cause severe health problems or death.

Protect yourself and your family with a quality Carbon Monoxide detector.

• Tamper Resist Feature –Can be activated to cause unit to go into alarm if it has been unplugged or has come loose from the outlet.
• 2 AA Battery Backup – Provides continuous protection even during power outages.
• Low Battery Hush - Silences low battery chirp warning for up to 12 hours in order to maintain protection without having to replace the batteries at an inconvenient time.
• Event Memory - If the unit has detected CO concentrations of 100ppm or greater, the green LED will flash every 10 seconds.
• Battery Pull tab - Eliminates battery installation time.
• Loud 85 Decibel Alarm - Alerts of deadly CO gas.
• Green LED - Indicates alarm is receiving power and operating properly.
• Red LED - Illuminates when in alarm mode.
• Test/Reset Button –Tests the unit for proper operation. Resets the Carbon Monoxide alarm.
• 10-Year End of Life Warning –Alerts user to replace CO alarm after 10-years of operation. (40% longer than other CO alarms)
• UL Listed – Listed by UL as a Single Station Carbon Monoxide Alarm

Installed Cost

Over-the-Counter Cost